Industrial safety helmets are crucial personal protective equipment used to protect workers from head injuries in the workplace. To ensure that safety helmets provide adequate protection, various standards have been developed globally to specify their design, performance, and testing requirements. This article will discuss the most common standards for industrial safety helmets.
European Standard EN 397
EN 397 is a standard developed by the European Committee for Standardization (CEN) for industrial safety helmets. It specifies requirements for industrial safety helmets' design, construction, and performance. Helmets complying with EN 397 are suitable for protection against falling objects and for use in areas where electrical hazards may be present.
The standard specifies that the helmet should have an impact-resistant shell made from high-density polyethylene (HDPE) or another suitable material. The helmet should also have an inner lining made from expanded polystyrene (EPS) or a similar material to provide cushioning against impacts.
EN 397 also requires that the helmet should have an adjustable chinstrap and a harness system that allows the helmet to fit securely and comfortably on the head. The standard also specifies requirements for the helmet's ventilation, electrical insulation, and resistance to penetration and flame.
American National Standard Institute (ANSI) Z89.1
ANSI Z89.1 is a standard developed by the American National Standards Institute for industrial head protection. The standard specifies requirements for industrial safety helmets' design, construction, and performance.
Helmets complying with ANSI Z89.1 are classified based on their level of impact protection. There are two classes of helmets: Class G for general use and Class E for electrical hazards. The standard also specifies requirements for the helmet's retention system, ventilation, and resistance to penetration and flame.
Australian/New Zealand Standard AS/NZS 1801:1997
AS/NZS 1801:1997 is a standard developed by the joint Australian and New Zealand Standards Committee for industrial safety helmets. The standard specifies requirements for the design, construction, and performance of industrial safety helmets.
The standard requires that helmets should have an impact-resistant shell made from HDPE or a similar material. The helmet should also have an inner lining made from EPS or a similar material to provide cushioning against impacts. The standard also specifies requirements for the helmet's retention system, ventilation, electrical insulation, and resistance to penetration and flame.
International Organization for Standardization (ISO) 9001
ISO 9001 is a quality management standard developed by the International Organization for Standardization. The standard specifies requirements for a quality management system that an organization can use to ensure that its products and services meet customer requirements.
Many industrial safety helmet manufacturers comply with ISO 9001 to ensure that their products meet the highest quality standards. Compliance with ISO 9001 involves implementing a quality management system that includes processes for design, testing, and production.
Canadian Standards Association (CSA) Z94.1
CSA Z94.1 is a standard developed by the Canadian Standards Association for industrial head protection. The standard specifies requirements for industrial safety helmets' design, construction, and performance.
The standard requires that helmets should have an impact-resistant shell made from HDPE or a similar material. The helmet should also have an inner lining made from EPS or a similar material to provide cushioning against impacts. The standard also specifies requirements for the helmet's retention system, ventilation, electrical insulation, and resistance to penetration and flame.
Conclusion
In conclusion, industrial safety helmets are crucial personal protective equipment used to protect workers from head injuries in the workplace. Various standards have been developed globally to specify their design, performance, and testing requirements. The most common standards for industrial safety helmets include EN 397, ANSI Z89.1, AS/NZS 1801:1997,
YULONG Safety Tools Manufacturer Corp.,Ltd. is a professional safety equipment producer in China with more than 20 years. We are Specialized in Head Protection, Eye and Face Protection, Hearing Protection, Respiratory Protection, Knee Protection etc. YULONG SAFETY has passed ISO 9001 Internal Quality system Certification. All product passed CE, ANSI, CSA, EMC etc. With experienced development teams and complete production supporting facilities.
Warmly welcome to cooperate with your company. We’ll do the utmost to support you.
Phone
+86-579-82411268 +8615958954313
Address
No.361 Xinye Street, Chengbei Industrial Zone, Wucheng District, Jinhua City, Zhejiang Province, China.
